Identify this component with a weight inside a cylinder
This component was pulled from a device that was used to detect movement. When I first saw this part, I thought it was an electrolytic capacitor, but upon closer inspection, I found that if I shake the...
View ArticlePIR motion sensor connected to Arduino sometimes does not detect a repeatable...
I have connected the PIR motion sensor HC-SR501 to an Arduino Uno and its jumper settings is set to H and GND. (This is not a physical jumper, but a small link that connects both H and GND.)It detects...
View ArticleAdvice on setting up sensor switch
Hi I would like to fit a (motion sensor/IR sensor) sensor switch to a machine in my catering van. The machine is a 12v machine.I would like to start the machine using the sensor switch and would like...
View ArticlePIR sensor led strip with N channel mosftet
I have a PIR sensor (HC-SR501) and I want it to turn an led strip(12V 0.8A) on when the sensor detects motion and off when there's no motion.I checked a previous thread which is similar in that thread...
View ArticleTriggering 12v Relay with HC-SR501 PIR sensor
I have a SRD-12VDC-SL-C relay with this configuration:https://robu.in/product/1-roadchannel-relay-module-light-coupling-12v/And I want to trigger it with PIR Motion Sensor Detector Module...
View ArticleBetter displacement finder? Lasers/Inertial Sensors
I've seen laser rpm measurement devices. But can it be used the find displacement/distance moved for object when attached to it?I know taking rpm of wheel and multiplying by circumference would give...
View ArticleCan I electronically trigger a PIR motion sensor?
I would like to trigger a PIR sensor using an infrared LED. Is that possible? My goal is to simulate motion in front of the PIR, when there otherwise is none. I tried using a handheld remote control,...
View ArticleWhat makes smartphones tilt-sensitive? Will they retain this ability in...
Most smartphones are tilt-sensitive, but what device makes this possible? Additionally, how does it (and the sensors associated with it) work?Also, since the working of these sensors seem, almost...
View ArticlePartial Differential Equations to Describe Electric Current
I am a newbie in PDE. I know that Navier-Stokes equations are used to describe the motion of viscous fluid substances, what are the equivalent partial differential equations that are used to describe...
View ArticleCompensate centrifugal force in accelerometer measurements
I'm working on a project that includes counting the revolutions of a cylinder connected to an engine. This engine runs at a minimum of 5 revolution per second and a maximum of 9 revolution per second.A...
View ArticleSense human behind plastic?
We need to get some kind of a simple sensor, that can sense someone is standing close to a product . But, it has to be behind plastic, and not seen at all .We only need to detect someone 1 meter away...
View ArticleChanging regular momentary switch to a motion detector in staircase timer...
(Reference image below)I have a classic staircase timer circuit ("TC") where any of the momentary switches will trigger the timer to power all the bulbs. Now I want to replace one of the "T" switches...
View ArticleSR501 PIR Motion sensor outputs high voltage in signal pin
I have connected a SR501 is powered by 5v converted from 12v through 7805 voltage regulator. The output voltage on the signal pin is normally 5v and on high it outputs 8v. This makes my relay module to...
View ArticleMotion sensor to detect birds and small animals but ignore humans
I would like to develop a motion activated sprinkler to deter birds (cranes and other smaller birds) and small animals from eating the fish in my pond. I am using the approach of controlling a solenoid...
View ArticleClosed Loop Stepper Motor/Driver
I have been tasked with building a motion control demo box. The controller MUST include an Omron Delta Tau Power PMAC (CK3W-AX1515P).I can be flexible with the other components (motors, drivers, etc.)...
View ArticleA few questions on PIRs and other motion detectors
I grew up incorrectly believing that motion detectors (as part of burglar alarm systems) were designed to detect movement, when in actual fact it is the movement of a heated (like body heat) object...
View ArticleMotion triggered battery powered dimmable COB LED light
My view on life, in any field, is not to produce more but to consume less. Everybody told me this is a very eccentric weird mentality. Perhaps they are right. Nevertheless I have to build my project to...
View ArticleUnderstanding use of accelerometers to measure angular (rotational?)...
Imagine this: A rod is attached at one end to a rotating shaft. So, as the shaft rotates from 0 to 90 degrees back-and-forth (in the xy plane), so does the rod. My goal is to measure the instantaneous...
View ArticleHow to add more lights and sirens to motion detector
I have a motion detector size of a cigarette box that rings bell or simple song when activated using a small remote control. We turn it on after closing the business to go home. We've had many window...
View ArticleSensor options to detect ball
I am working on what I hope is a simple project as I am dabbling in this field. I am trying to create a target (in the shape of a box) roughly 1m by 0.5 meters into which soccer balls will be shot...
View Article